Menu

MENU

1/4" Mini Reversible Bit Ratchet

1/4" Mini Reversible Bit Ratchet

Handy size with 180° flex head are convenient to work in narrow space.

More
10" Patent Water Pump Pliers

10" Patent Water Pump Pliers

Multi-purpose jaw for round, flat or hex bolts and nuts.

More

Universal Cooling System Pressure Testing

24-5-61

Features

  • 1. Check leaking status from tank cooling systme by pushing pressure to manual pump.
  • 2. There a 3 different sizes for connecting with different size of cooling tank mouth.
  • 3. Cooling tank shall not be more than 20 PSI if under proper pressure.If stop moving while the highest value pointed, then means the cooling tank is under proper operation.
  • 4. Tester testing operation shall be worked while cooling tank has been in low temperature.
EACH PARTS INTROUDUCTION
Item No.Electrical informationOperating Temp. (mm)Relative humidityAltitude restrictionAmbient Temp.
24-5-61DC-12V, 7A, 85W0℃-40℃(32-104℉)20~80% Below 2000m -40℃~75℃
OPERATION STEP INTROUDUCTION

This is a very simple operation, but please pay attention to the engine before the operation, wait for the water tank to cool before testing, do not open the tank lid when the temperature of the tank is still high.

 OPERATION STEP 1

Choose the most suitable Universal Adapter to place it to cap

OPERATION STEP 1

OPERATION STEP 2

With one hand use fixed handle tool and wrench to tum nut clockwise until rubber seal is tightened to inlet.

OPERATION STEP 2

OPERATION STEP 3

Connect Quick Coupler from hand pump to Universal adapter. Push downwards for fixed position.

OPERATION STEP 3

OPERATION STEP 4

Pressure hand pump handle few times, pressure gauge needle will climb upwards from 0 PSI. Pressure rate should not exceed 20PSI. If pressure shows no change, then cooling system is normal.

OPERATION STEP 4
Related Products